5kw Compact FM Transmitter EMC5000

5000 W FM Compact Transmitter

5kw Compact FM Transmitter EMC5000

5000 W FM Compact Transmitter

 

FEATURES
FREQUENCY RANGE: 87.5 ÷ 108 MHz
MODULATION: FM
EMISSION CLASS: F3E
VCO TUNING: 25 MHz
FREQUENCY STABILITY: ± 2.5 ppm (bette upon request)
SYNTHESIZER STEP: 10KHz / 100KHz
POWER OUTPUT: 0 ÷ 3000 Watts 0 ÷ 5000 Watts
SPURIOUS EMISSION: < – 85 dBc or better
HARMONIC EMISSION: < – 74 dBc
MPX STEREO SEPARATION: > 56 dB @ 1KHz
HARMONIC DISTORSION: < 0.1 % (TYP. 0.06%) @ 1KHz
BASE BAND: 30 Hz ÷ 60 KHz within 0.05 dB
UNWEIGHTED S/N RATIO: >80 dB (30Hz ÷ 15KHz 50μS RMS)
ASYNCRONOUS AM S/N Ratio: > 65 dB Ref. 100% AM 400Hz
SYNCRONOUS AM S/N Ratio: > 60 dB with FM @ 75KHz @400Hz
PRE-ENPHASIS: 50 OR 75 μS int. selectable
RF OUT CONNECTOR: 7/16”-F 50 Ohm 7/8″ 50Ohm
MPX INPUT CONNECTOR: BNC-F
MPX INPUT IMPEDANCE: 2 KOhm
SCA INPUT CONNECTOR: BNC-F
COOLING: High efficiency brushless fans
OP.TEMPERATURE RANGE: – 10 ÷ +45 °C
MAXIMUM UMIDITY: 90 % not condensing
AC SUPPLY: 110 ÷ 250 VAC – 47 ÷ 63 Hz
OVERALL EFFICIENCY >70%
DIMENSION: 5 unit rack 19″, 600mm depth
WEIGHT: 30Kg 35Kg

500W Compact Transmetteur FM stéréo

500W Compact Transmetteur FM stéréo

500W Compact Transmetteur FM stéréo

 

ELETEC 500 Watt exciter with Mono and MPX input

FREQUENCY RANGE                                   87.5 ÷ 108 MHz
MODULATION                                                 FM
EMISSION CLASS                                          F3E
VCO TUNING                                                  25 MHz
FREQUENCY STABILITY                              ± 2.5 ppm
SYNTHESIZER STEP                                    100KHz
POWER OUTPUT                                           0 ÷ 500 Watts
SPURIOUS EMISSION                                  < – 80 dB or better
HARMONIC EMISSION                                  < – 70 dB
STEREO SEPARATION                                 > 55 dB @ 1KHz
DISTORSION                                                   < 0.1 % (typ. 0.06%) @ 1KHz
BASE BAND                                                     30 Hz ÷ 60 KHz within 0.15 dB
UNWEIGHTED S/N RATIO                           >80 dB (30Hz ÷ 15KHz 50 µS RMS)
ASYNCRONOUS AM S/N Ratio                   > 70 dB Ref. 100% AM 400Hz
SYNCRONOUS AM S/N Ratio                      > 65 dB with FM @ 75KHz @400Hz
PRE-ENPHASIS                                             50 OR 75 µS int. selectable
RF OUT CONNECTOR                                 N-F 50 Ohm
MPX INPUT CONNECTOR                           BNC-F
MPX INPUT IMPEDANCE                              2 KOhm
SCA INPUT CONNECTOR                           3 BNC-F
COOLING                                                         Forced Air
OP.TEMPERATURE RANGE                        -10 ÷ +45 °C
MAXIMUM HUMIDITY                                      90 %
AC SUPPLY                                                     100 ÷ 240 VAC – 47 ÷ 63 Hz
DIMENSION                                                     3 unit rack 19″, 360mm depth
WEIGHT                                                            20 Kg

DVB-T/H TRANSMITTER

DVB-T/H TRANSMITTER

DVB-T/H TRANSMITTER

DVB-T and ATSC standards available
Compact design
High energy efficiency to minimize consumption and OPEX
High redundancy to ensure maximum reliability
Natural convection or forced air cooling
A.G.C. and A.L.C. circuits
Remote control interface
Optional:
Transposer configuration
Dual driver configuration
Dual cast configuration
N+1 configuration
1Hz step local oscillator
GPS receiver module
SNMP
The digital G series consists of a professional DVB-T or ATSC transmitter suitable for low and medium powers, supporting MFN architecture. This series is designed as an easy, flexible and compact system. It includes: DVB-T or ATSC exciter, an eventual power amplifier and an output filter to comply with the emission mask specification required. The device could be contained in 12HE or 21HE cabinets.
Transmitters output power is available from 2.5W to 500/900W.
The modular construction of the equipment makes this transmitter family very reliable and facilitate maintenance and control procedures.
The exciter, built in 3HE cabinet, consists of plug-in modules and integrates the digital modulator as well as the up-converter section.
All DVB-T modulator operating parameters including modulation type, FEC, guard interval, carriers number and bandwidth can be easily set on the front panel. The plug-in structure makes easy to obtain any configuration desired and also makes possible to insert other optional modules (like ATV modulator and “timer” module, easily transforming the digital driver in a dual cast one). High efficiency amplifier, based on latest LD-MOS technology, offers great linearity and excellent performances. Each amplifier integrates modular switching power supplies and the following protections: SWR, over-temperature, over-drive, over-current and over-voltage. Each device is equipped with a LCD meter display to control all operating parameters and a remote control interface.

Broadcast 1000W COMPACT FM SOLID STATE TRANSMITTER

Broadcast 1000W COMPACT FM SOLID STATE TRANSMITTER

Broadcast 1000W COMPACT FM SOLID STATE TRANSMITTER

Eletec Broadcast 1000W compact fm solid state transmitter

A perfect Broadcast 1000W COMPACT FM SOLID STATE TRANSMITTER for a small community radio station, religious radio or an exciter for a larger 5KW, 10KW, 20KW, or even 30KW FM amplifier. High performances frequency agile 87.5-108 MHz Broadcast Stereo FM transmitter, 0-1000 W out adjustable, synthesized, agile frequency setting, excellent S/N ratio, SCA/RDS inputs, complete metering.

The FAL1000 are really innovative FM Transmitters with 1000W output power respectively, for these transmitters we have estimated a 20% longer MTBF. Thanks to the ultimate electronic components that have been largely implemented in the design.
Power output1000 Watt
RF Output Impedance50 Ohms
RF Output Connector7.16
Frequency range87.5 – 108 MHz
Modulation typeF3E stereo and mono
Modulation ModeMono, stereo, MPX, Aux
Pre-emphasis0, 50, 75 us selectable
AC Input powerSingle phase 115/230/240 Vac±10%
CoolingForced Air by internal fans
Operating temperature-10°C ÷ +45°C
Max humidity95% not condensing
Dimensions19″ – 3U rack

10 000 Watt Broadcast FM Transmitter

10 kW FM Mono MPX Stereo Transmitter

10 000 Watt Broadcast FM Transmitter

High Power FM Transmitter 10kw

Equipped with the latest MOSFET RF technology, the E10K FM power amplifier
features excellent efficiency and compact design.
Four E2K Amplifiers are combined in a compact and clear modular design.
High efficiency of at least 64% independent of output power level.
Each RF amplifier has its own power supply, guard circuits and integrated harmonic filter..
Each amplifier module is, therefore, selfmonitoring and self-protective
Reduced stock of spares and high standardization level through the use of identical modules
Easy monitoring and intelligent fault detection system as well as remote control via BITBUS or modem
High reliability and optimum price/performance ratio are distinguishing features of the E10K